Posted on Leave a comment

How To Fix Whirlpool Ice Maker Leaking Water Into Bin – 6 Fixes

How To Fix Whirlpool Ice Maker Leaking Water Into Bin

Whirlpool Ice Maker Leaking Water Into Bin

Whirlpool ice makers are a great convenience for many households, but they can also be a source of frustration if they develop problems. One common problem is when your Whirlpool ice maker starts leaking water into the bin. Leaking water problem is common in ice makers and fortunately, this is usually an easy fix. The following article will provide a complete guide on fixing a Whirlpool ice maker leaking water into the bin.

Causes And Fixes to Whirpool Ice Maker Leaking Water into the Bin

1. Whirlpool Ice Maker is Faulty

ice maker leaking water into bin


  • The ice maker is out of water. 
  • The water inlet valve is defective or closed. 
  • The ice level control board has failed. 
  • The freezer temperature is set too low. 
  • The water filter is clogged or blocked. 
  • The ice maker control arm is in the off position. 


  • Check the water supply and ensure it is connected and running properly. 
  • Check the water inlet valve and ensure it is open and supplying water to the ice maker. 
  • Replace the ice level control board if it is defective.
  • Adjust the temperature in the freezer to the recommended setting for optimum ice production. 
  • Replace the water filter or clean it if it is clogged or blocked. 
  • Move the ice maker control arm to the on position.

2. The Inlet Valve of the Whirlpool Ice Maker is Damaged 


  • The water filter in the ice maker may be clogged, preventing the correct amount of water from entering the ice maker and causing the inlet valve to become damaged. 
  • A leaking water line may be causing water to escape from the ice maker, leading to damage to the inlet valve. 
  • The ice maker may be malfunctioning, causing the inlet valve to become damaged. 


  • Replacing the water filter will ensure that the correct amount of water is entering the ice maker, thus avoiding damage to the inlet valve.
  • If there is a leak in the water line, it should be repaired as soon as possible to prevent further damage to the inlet valve. 
  • If the ice maker is defective, it should be replaced with a new one to avoid further damage to the inlet valve.

3. Water Filter is Messing with the Ice Maker

Water Filter is Messing with the Ice Maker


  • The water filter can become clogged over time with sediment and other debris, preventing water from flowing through it. This can cause the ice maker to not get enough water to make ice. 
  • If the water filter is not installed correctly, it can cause water flow problems and prevent the ice maker from getting enough water. 
  • If the water line to the ice maker is frozen, it can prevent water from flowing into the ice maker and cause it to malfunction. 


  • Replace the water filter with a new one to ensure clean, unfiltered water is flowing through the ice maker. 
  • Make sure the water filter is installed properly according to the manufacturer’s instructions. 
  • Check the water line to make sure it is not frozen. If it is, thaw it out and make sure it is properly insulated to prevent it from freezing again.

4. Water lines or Wire Connection is Damaged 

whirlpool ice maker leaking water


  • Improper installation of the water line or wire connection 
  • Corrosion or wear and tear of the water line or wire connection 
  • Physical damage to the water line or wire connection from external sources 


  • Replace the water line or wire connection with a new one 
  • Repair the water line or wire connection with an appropriate sealant or adhesive 
  • Inspect and clean the water line or wire connection regularly to prevent further damage 
  • Apply protective coating on the water line or wire connection to prevent external damage

5. Problem with Condensations Drain of Ice Maker


  • The condensation drain line is clogged. 
  • The condensation drain pan is full. 
  • The condensation drain hose is loose or has come off. 


  • Clean the condensation drain line with a mixture of warm water and white vinegar. 
  • Empty the condensation drain pan and make sure it is clean. 
  • Secure the condensation drain hose to ensure it is properly fitted.

Cause: The condensation drain of an ice maker can become blocked or clogged due to a buildup of dirt, debris, or other foreign objects that have entered the drain tube. 

Fix: To fix this problem, you will need to locate the condensation drain tube and inspect it for any blockages. If a blockage is found, it should be cleared using a vacuum or a flexible snake. If there are no blockages, you may need to check the water pressure or the water supply line for any issues. If these are not the issue, you may need to replace the condensation drain tube with a new one.

6. Ice is Jammed


  • Too much ice has been put into the ice maker.
  • The ice maker has been blocked. 
  • The water supply is not flowing freely. 
  • The water filter is clogged. 


  • Remove some of the ice from the ice maker. 
  • Check for blockage and remove any that is present. 
  • Check the water supply and make sure it is flowing freely. 
  • Replace the water filter if necessary.

Key Takeaway

1. A Whirlpool ice maker can leak water into the bin for a variety of reasons.
2. To troubleshoot the problem, you can check the water supply, the water inlet valve, the ice level control board, the freezer temperature, the water filter, the ice maker control arm, the condensation drain line, the condensation drain pan, the condensation drain hose, the condensation drain tube, and the ice maker.
3. If you are unable to identify or fix the problem, you may need to contact a professional appliance repair service.


This article provides a comprehensive guide on troubleshooting and repairing a Whirlpool Ice Maker when it leaks water into the bin. By following the steps outlined here, you should be able to identify and repair the issue quickly and efficiently.

Even after trying all these troubleshooting methods, there is a water leak then it is time to replace your ice maker with a new one. You can replace your old worn out ice maker with a nugget ice maker, undercounter ice maker or a clear ice maker, there are plenty of options to look into.


It is likely that the water inlet valve is faulty and allows too much water to enter the ice maker. It is possible that the ice maker needs to be replaced altogether. Additionally, the water supply line may need to be replaced or the water pressure may be too high.

The Whirlpool ice maker is equipped with an infrared beam that detects when the ice bin is full. When the beam is broken, the ice maker stops producing ice.

It is recommended that the ice bin of a Whirlpool refrigerator be cleaned every three months.

The recommended frequency for cleaning and emptying a Whirlpool ice maker is once every 6 months.

Leave a Reply

Your email address will not be published. Required fields are marked *